Product Search  

Filter by Manufacturer:

Filter by Pressure Relief Type:

Pressure Reducing Valves

  • Daikin JGB - Reducing and Check Valve
    ~ scroll down to find the part you need ~
    Market leaders in environmentally responsible heat pumps, ventilation and air conditioning systems for domestic, commercial and industrial applications.
    The Daikin JGB Reducing and Check valve is used when the pressure in a partial oil circuit is set lower than a main circuit. Even if the primary main circuit varies, the secondary pressure can be kept constant. If a remote control relief valve is connected to a vent port, the branch circuit pressure can be controlled.
  • Daikin JGB - Reducing and Check Valve
    ~ scroll down to find the part you need ~
    Market leaders in environmentally responsible heat pumps, ventilation and air conditioning systems for domestic, commercial and industrial applications.
    The Daikin JGB Reducing and Check valve is used when the pressure in a partial oil circuit is set lower than a main circuit. Even if the primary main circuit varies, the secondary pressure can be kept constant. If a remote control relief valve is connected to a vent port, the branch circuit pressure can be controlled.
  • Daikin SGB - Low Pressure Reducing Valve
    ~ scroll down to find the part you need ~
    • The Daikin SGB Low Pressure Reducing Valve is used when pressure in a partial oil circuit is set lower than the main circuit.
    • Even if the primary main circuit varies, the secondary pressure can be kept constant.
    • If a remote control relief valve is connected to a vent port, the branch circuit pressure can be controlled.
    • The option to prevent surge pressure is available.
  • Daikin SGR - Relief Reducing Valve
    ~ scroll down to find the part you need ~
    Market leaders in environmentally responsible heat pumps, ventilation and air conditioning systems for domestic, commercial and industrial applications.
    • The Daikin SGR Relief Reducing Valve has a combination circuit with a reducing valve, a relief valve and check valve controlled a system, but this relief valve gets together all these three valves into one unit and functions as a balancing valve.
    • As the pressure variation corresponding to a load flow rate variation is small, the control accuracy increases.
    • Pressure can be regulated by the handle.
    • As it is a external drain type, the back pressure in the return line doesn’t influence the performance.
  • Duplomatic ZP - Pressure Reducing Valve
    ~ scroll down to find the part you need ~
    Duplomatic Oleodinamica represents the real alternative in the hydraulics market. Duplomatic’s wide range of products and worldwide service network, grant its users a real competitive advantage. The Duplomatic Z*-P type valves are used when a branch with a lower pressure than the main one is desired in the hydraulic circuits. Being normally open, they allow passage of oil up to the point when the outlet pressure is less than that set on the valve; the valve closes and keeps the outlet pressure constant when it reaches the set value. The intake pressure fluctuation, for values greater than the set values, does not affect the reduced outlet pressure, and furthermore the particular design of the valve prevents exceeding the set value even in transients. The drainage, to be connected directly to the tank, discharges about 0,8 l/min. The valves are available, upon request, with reduced drainage (0,4 l/min). Available even with incorporated check valve upon request, with cracking pressure of 0,5 bar.
  • Daikin JGB - Reducing and Check Valve
    ~ scroll down to find the part you need ~
    Market leaders in environmentally responsible heat pumps, ventilation and air conditioning systems for domestic, commercial and industrial applications.
    The Daikin JGB Reducing and Check valve is used when the pressure in a partial oil circuit is set lower than a main circuit. Even if the primary main circuit varies, the secondary pressure can be kept constant. If a remote control relief valve is connected to a vent port, the branch circuit pressure can be controlled.