Product Search  

  • CEM-PA Closed Loop Pressure Amplifier
  • CEM-SA Closed Loop Position Module Functional Diagram

Continental Hydraulics CEM-SA- Closed Loop Position Modules

~ scroll down to find the part you need ~

Continental Hydraulics are at the forefront of engineering hydraulic solutions for over 50 years-a testament to a long-standing reputation built upon your challenges and opportunities. A worldwide leader- a one-stop-shop for valves, pumps, power units and proportional products-all assembled in the USA.

The Continental Hydraulics CEM-SA closed loop position module is designed to quickly and accurately move hydraulic cylinder loads. Position and velocity commands are from analog sources Cylinder position feedback is from an analog source.
Stroke dependent deceleration is used to provide quick and repeatable positioning. Internal ramp and velocity adjustments allow for easy system.
A wide range of analog signals are accepted. User may select either voltage or current input mode.
These inputs are easily scaled to match system requirements.
Forward and Reverse “jog” inputs allow for manual load control. A user definable window for “in position” triggers an output for communication to the next machine function.
Output is an analog voltage, 0 to +10vdc, suitable for directly driving a proportional directional valve with on board electronics.
This module is easily adapted to a variety of system requirements. All variables are user adjusted with easy to use software on your Microsoft Windows laptop.
Control variables are stored in non-volatile memory internal to the module. All variables can be read by the laptop, and reproduced exactly on other modules

Product Specification

Description Units
Power Supply VDC 12 to 30 vDC
Power Supply Consumption <100mA + Solenoid
Power Supply External Fuse 3 A (Medium Action)
Analog Input Voltage 0 – +10 vDC
Analog Input Impendance 33 K Ohms
Analog Input Current 0 to 20 (type 4 to 20)
Analog Input Impendance 250 Ohm
Analog Input Resolution <0.01 %
Analog Input Sample Time 1.0 mS
(Speed Input) Voltage 0 to +10 vDC
(Speed Input) Impendance 90 K ohm
Digital Outputs Logical 0 = < 2 (50mA max) / Logical 1 = ~ Power Supply
Electrical Connection Programming Port RS-232 3.5mm Stereo Jack
Electrical Connection Power and Signal 4 strips with 4 screw terminals each
Electrical Connection Ground Via DIN Rail
Digital Inputs Logical 0 = 10
Digital Inputs Impendance 25K ohm
Analog Output Voltage 0 to +/- 10
Analog Output Current 5 mA (max)
Analog Output Resolution 0.024 %
Housing Module Snaps to 35mm DIN Rail EN 50022
Housing Material Polyamide PA 6.6
Housing Combustibility Class UL94 VO
Housing Protection Class IP 20
Housing Storage Temperature -20 to +60 °C
Housing Storage Temperature -20 to +70 °C
Housing Humidity 95 % (non codensing)
Electro Magnetic Compatibility Emission EN 61000-6-2
Electro Magnetic Compatibility Immunity EN 61000-6-3
Electro Magnetic Compatibility Vibration Resistence EIC 60068-2-6

Continental Hydraulics – CEM – Open and Closed Loop Control Modules Data Sheet

Continental Hydraulics – CEM – Open and Closed Loop Control Modules Setup Software

Continental Hydraulics – CEM – Open and Closed Loop Control Modules User Manual

Additional Information

Manufacturer

Continental Hydraulics

Electronic Control Modules

Axes Positioning

Reviews

There are no reviews yet.

Be the first to review “Continental Hydraulics CEM-SA- Closed Loop Position Modules”

Your email address will not be published. Required fields are marked *