Product Search  

  • VED07MJ Directional Control Valves with on Board Electronics & Position Feedback
  • VEDMJ Pilot Operated Directional Control Valve Overall Dimensions
  • VED08MJ Pilot Operated Directional Control Valve Overall Dimensions
  • VED07MJ Pilot Operated Directional Control Valve Overall Dimensions
  • VED05MJ Pilot Operated Directional Control Valve Overall Dimensions

Continental Hydraulics – VED0*MJ Pilot Operated Directional Control Valves with On Board Electronics & Position Feedback

~ scroll down to find the part you need ~
Continental Hydraulics are at the forefront of engineering hydraulic solutions for over 50 years-a testament to a long-standing reputation built upon your challenges and opportunities. A worldwide leader- a one-stop-shop for valves, pumps, power units and proportional products-all assembled in the USA.

Continental Hydraulics VED0*MJ pilot operated 4-way proportional valves with On-Board Digital Amplifier and Spool Position sensing, conform to NFPA and ISO 4401:2005 (CETOP RP 121H) mounting standards.

These valves are designed to control the direction and oil flow rate based on the degree of command signal supplied to the On-Board Amplifier. In event of a loss in electrical power, the centering springs will return the valve spool to the center position.

The Spool Position Sensor circuit improves the overall valve performance by reducing hysteresis and improving response times.

The On-Board microprocessor controls all the valve functions and is pre-set to optimal valve performance. In-field adjustments can be performed via software to customize the parameters based on your application. The valves with internal pilot are available also with a pressure reducing valve.

Product Specification

Description VED05*MJ VED07MJ VED08MJ
Maximum Operating Pressure P – A – B Ports 5000 psi / 350 bar 5000 psi / 350 bar 5000 psi / 350 bar
Maximum Operating Pressure T Port (int.drain) 145 psi / 10 bar 145 psi / 10 bar 145 psi / 10 bar
Maximum Operating Pressure T Port (ext.drain) 3600 psi / 250 bar 3600 psi / 250 bar 3600 psi / 250 bar
Flow Capacity with ∆P 145 psi (10 bar) 21 gpm / 80 l/min
21/10.5 gpm / 80/40 l/min
26.5 gpm / 100 l/min
40 gpm / 150 l/min
40/20 gpm / 150/75 l/min
53 gpm / 200 l/min
80 gpm / 300 l/min
80/40 gpm / 300/150 l/min
Max Flow 48 gpm / 180 l/min 120 gpm / 450 l/min 210 gpm / 800 l/min
Protection IEC 60529 IP 67 IP 67 IP 67
Power Supply Max Current 3A 3A 3A
Connection 7 pin (6+gnd) metal 7 pin (6+gnd) metal 7 pin (6+gnd) metal
Mounting Surface
NFPA D05 alt. A /alt. B
ISO 4401-05-*-0-05
NFPA D07
ISO 4401-07-07-0-05
NFPA D08
ISO 4401-08-08-0-05
Weight Single Solenoid 18.7 lbs / 8.5 kg 23.2 lbs / 10.5 kg 37.5 lbs / 17 kg
Weight Double Solenoid 19.8 lbs / 9.0 kg 24.3 lbs / 11.0 kg 38.4 lbs / 17.4 kg

Continental Hydraulics – VED0*MJ Directional Control Valves with on Board Electronics & Position Feedback – Data Sheet

Additional Information

Manufacturer

Continental Hydraulics

Proportional Products

Directional Control with On-Board Control and Spool Position Feedback

Reviews

There are no reviews yet.

Be the first to review “Continental Hydraulics – VED0*MJ Pilot Operated Directional Control Valves with On Board Electronics & Position Feedback”

Your email address will not be published. Required fields are marked *