• VAD03M Directional Control Valve
    ~ scroll down to find the part you need ~
    Continental Hydraulics are at the forefront of engineering hydraulic solutions for over 50 years-a testament to a long-standing reputation built upon your challenges and opportunities. A worldwide leader- a one-stop-shop for valves, pumps, power units and proportional products-all assembled in the USA.
    The Continental Hydraulics VAD05M - VMD05M directional control valves with air pilot actuation, hydraulic pilot actuation and lever actuation. These valves conform to NFPA D05 and ISO 4401 mounting standards. They are available in both 3 way and 4 way styles. All versions are available in 2 position spring offset, 2 position detent, 2 position spring centered and 3 position spring centered versions. The lever valve also is available in a 3 position detent model. A wide range of spools for different requirements are available.
  • CEM-MS Closed Loop Synchronization Module
    ~ scroll down to find the part you need ~
    Continental Hydraulics are at the forefront of engineering hydraulic solutions for over 50 years-a testament to a long-standing reputation built upon your challenges and opportunities. A worldwide leader- a one-stop-shop for valves, pumps, power units and proportional products-all assembled in the USA. The Continental Hydraulics closed loop PID module compares command and feedback signals, and applies traditional PID gain settings to the error signal. This modified signal is provided as an analog voltage (0 to +/-10v) output. It may be used to drive proportional pressure or flow control valves with on board electronics, or as a command to another amplifier module. It is suitable to provide dynamic closed loop control in pressure, force, or velocity systems. A wide range of analog signals are accepted. User may select either voltage or current input mode. These inputs are easily scaled to match system requirements. Input command can be ramped. PID variables are adjustable over a wide range. Easily switched from open loop to closed loop control. Output can be scaled to match the proportional valve being driven. If command current signal is outside of the proper range, the module is disabled. Digital outputs inform the user of system errors. This module is easily adapted to a variety of system requirements. All variables are user adjusted with easy to use software on your Microsoft Windows® laptop. Control variables are stored in non-volatile memory internal to the module. All variables can be read by the laptop, and reproduced exactly on other modules.
  • Continental Hydraulics VER03M - Proportional Pressure Relief Valves
    ~ scroll down to find the part you need ~
    Continental Hydraulics are at the forefront of engineering hydraulic solutions for over 50 years-a testament to a long-standing reputation built upon your challenges and opportunities. A worldwide leader- a one-stop-shop for valves, pumps, power units and proportional products-all assembled in the USA.
    The Continental Hydraulics VER03M is a direct operated proportional relief valve, with mounting in compliance with NFPA/T3.5.1 R2-2002 and ISO 6264:1998 standards. The VER03M valves are designed to modulate pressure in a hydraulic circuit directly proportional to the input current to the valve. The valve consists of a poppet, seat, spring and proportional solenoid. The spring and solenoid force acts on the poppet holding the valve closed. When system pressure exceeds the spring and solenoid forces, the valve begins to open and modulate P port pressure by discharging excess flow to tank. System pressure can be changed by changing the current to the solenoid. There are four pressure ranges available: 70 bar, 140 bar, 210 bar and 350 bar with flow up to 1.32 gpm. Any back pressure in T port is added to the controlled pressure in P port. The maximum recommended T port pressure is 30 psi while the valve is controlling pressure. The valve can be driven by a variable current power supply or an external power amplifier card designed to maximize the valve’s performance.
  • PR*SP Pilot Operated Pressure Relief Valve Series
    ~ scroll down to find the part you need ~
    Continental Hydraulics are at the forefront of engineering hydraulic solutions for over 50 years-a testament to a long-standing reputation built upon your challenges and opportunities. A worldwide leader- a one-stop-shop for valves, pumps, power units and proportional products-all assembled in the USA.
    The Continental Hydraulics PR*SPU valves are pilot operated pressure relief valves, for sub-plate mounting according to NFPA T3.5.1 and ISO 6264 standards. Available in three nominal sizes, each valve incorporates a main stage poppet with a conical seal design pilot section. The pilot section is controlled via internal or external pilot (X port). A hexagonal head screw controls the pressure adjustment. An optional solenoid valve expands the valve functionality by providing an unloading feature. In addition, two or three setting select able pressures are realized by adding a modular relief valve between the pilot stage and the solenoid valve.
  • Continental Hydraulics PVER - Vane Pump
    ~ scroll down to find the part you need ~
    Continental Hydraulics are at the forefront of engineering hydraulic solutions for over 50 years-a testament to a long-standing reputation built upon your challenges and opportunities. A worldwide leader- a one-stop-shop for valves, pumps, power units and proportional products-all assembled in the USA.
    The Continental Hydraulics PVER pumps are variable displacement vane pumps with direct pressure regulator governor spring for fast on/off response. The pump group is complete with hydrostatic axial compensation distribution plates that improve the volumetric efficiency and reduce wear of the components. The pressure regulator adjustable load spring keeps the pump group cam ring in eccentric position. When the delivery pressure equals the pressure corresponding to the spring setting, the cam ring is moved to reduce the displacement, adjusting the flow rate to the values required by the system. In zero flow demand condition, the pump delivers oil only to compensate any possible leakage, keeping the circuit pressure constant. The PVER pumps are available in four sized with maximum displacement from 0.4 to 1.35 cu in/rev and with pressure regulator max setting values up to 500 PSI and 1000 PSI (standard).
  • C05 MSV-P Pilot Operated Check Valve
    ~ scroll down to find the part you need ~
    Continental Hydraulics are at the forefront of engineering hydraulic solutions for over 50 years-a testament to a long-standing reputation built upon your challenges and opportunities. A worldwide leader- a one-stop-shop for valves, pumps, power units and proportional products-all assembled in the USA.
    The C05 MSV-P valve utilizes a guided spool and poppet-seat check valves as a blocking or load-holding device for high pressure applications. This valve allows free flow from the directional control valve work port to the load and blocks flow in the opposite direction. Flow is allowed from the load to the directional control valve work port when 40% of the load induced pressure is sensed in the opposing directional control valve work port.
  • Continental Hydraulics - VED03M Proportional Directional Control Valve
    ~ scroll down to find the part you need ~
    Continental Hydraulics are at the forefront of engineering hydraulic solutions for over 50 years-a testament to a long-standing reputation built upon your challenges and opportunities. A worldwide leader- a one-stop-shop for valves, pumps, power units and proportional products-all assembled in the USA.
    Continental Hydraulics VED03M direct operated 4-way proportional valves conform to NFPA D03 and ISO 4401 mounting standards. These valves are designed to control the direction and oil flow rate based on the amount of current supplied to the solenoid. In event of a loss in electrical power, the centering springs will return the valve spool to the center position. The valve solenoids can be driven by a variable current power supply or by use of external Power Amplifier Cards designed to maximize the valves’ performance. A variety of manual overrides are also available.
  • CEM-PID- Closed Loop Module
    ~ scroll down to find the part you need ~
    Continental Hydraulics are at the forefront of engineering hydraulic solutions for over 50 years-a testament to a long-standing reputation built upon your challenges and opportunities. A worldwide leader- a one-stop-shop for valves, pumps, power units and proportional products-all assembled in the USA. The Continental Hydraulics closed loop PID module compares command and feedback signals, and applies traditional PID gain settings to the error signal. This modified signal is provided as an analog voltage (0 to +/-10v) output. It may be used to drive proportional pressure or flow control valves with on board electronics, or as a command to another amplifier module. It is suitable to provide dynamic closed loop control in pressure, force, or velocity systems. A wide range of analog signals are accepted. User may select either voltage or current input mode. These inputs are easily scaled to match system requirements. Input command can be ramped. PID variables are adjustable over a wide range. Easily switched from open loop to closed loop control. Output can be scaled to match the proportional valve being driven. If command current signal is outside of the proper range, the module is disabled. Digital outputs inform the user of system errors. This module is easily adapted to a variety of system requirements. All variables are user adjusted with easy to use software on your Microsoft Windows® laptop. Control variables are stored in non-volatile memory internal to the module. All variables can be read by the laptop, and reproduced exactly on other modules.
  • VER03MG - Proportional Pressure Relief Valve with on Board Electro
    ~ scroll down to find the part you need ~
    Continental Hydraulics are at the forefront of engineering hydraulic solutions for over 50 years-a testament to a long-standing reputation built upon your challenges and opportunities. A worldwide leader- a one-stop-shop for valves, pumps, power units and proportional products-all assembled in the USA.
    The Continental Hydraulics VER03MG direct operated Proportional Relief Valve, with On-Board Digital Amplifier conforms to NFPA D03 / ISO 6264 standards. VER03MG valves are designed to control maximum pressure in low flow systems or as the proportional pressure pilot valve of larger two-stage pressure control valves. Output pressure is controlled proportional to the input command reference signal supplied to the On-Board Digital Amplifier. Four pressure ranges are available to help match your requirements. The On-Board microprocessor controls all the valve functions and is preset to optimal valve performance. In field adjustments can be performed, via software, to customize the parameters based on your application needs.
  • Continental Hydraulics Low Profile Hydraulic Power Pack
    ~ scroll down to find the part you need ~
    Continental Hydraulics are at the forefront of engineering hydraulic solutions for over 50 years-a testament to a long-standing reputation built upon your challenges and opportunities. A worldwide leader- a one-stop-shop for valves, pumps, power units and proportional products-all assembled in the USA.
    The Continental Hydraulics Low Profile Power Units are designed for use in locations where space is at a premium, or where the power of a NFPAPA/JIC-Style unit is needed in a smaller, less expensive package. They’re ideal for industrial applications requiring moderate fluid volume and flow rate.
    Typical applications include use with:
    •  Test Benches
    •  Machine Tools and Packaging Equipment
    •  Clamping Equipment
    •  Drilling Equipment
    Low Profile Power Units are the perfect choice for demanding industrial applications where heat buildup is unlikely, and compact installation is a must.
  • Continental Hydraulics VSD03 - Directional Control Valve
    ~ scroll down to find the part you need ~
    Continental Hydraulics are at the forefront of engineering hydraulic solutions for over 50 years-a testament to a long-standing reputation built upon your challenges and opportunities. A worldwide leader- a one-stop-shop for valves, pumps, power units and proportional products-all assembled in the USA.
    The Continental Hydraulics VSD 03M EXA, solenoid operated directional control valves are in compliance with ATEX 94/9/CE standards and are suitable for the use in potentially explosive atmospheres, that fall within either the ATEX II 2GD for gas or for dust classification. CERTIFICATE NUMBER: CEC II ATEX 076 Continental’s line of explosion proof, 4-way, directional control valves is available in 2 position spring offset, 2 position detent, 2 position spring centered and 3 position spring centered versions. Four spools are available: block center, open center, float center and tandem center. The explosion proof solenoids are available in 12 VDC, 24VDC and 120VAC. The AC coil is equipped with a rectifier bridge. The DC coils have a built-in bi-directional diode for surge suppression.
  • Continental Hydraulics F05MSV - Check Valve
    ~ scroll down to find the part you need ~
    Continental Hydraulics are at the forefront of engineering hydraulic solutions for over 50 years-a testament to a long-standing reputation built upon your challenges and opportunities. A worldwide leader- a one-stop-shop for valves, pumps, power units and proportional products-all assembled in the USA.
    The Continental Hydraulics F05MSV is a non-compensated flow control valve with a check valve for reverse free flow. This valve increases its orifice value from fully closed to fully open with counter-clockwise rotation. Available with check valve on line A, B or both lines, for meter-in and meter-out.
  • Continental Hydraulics - VED05M Proportional Directional Control Valve
    ~ scroll down to find the part you need ~
    Continental Hydraulics are at the forefront of engineering hydraulic solutions for over 50 years-a testament to a long-standing reputation built upon your challenges and opportunities. A worldwide leader- a one-stop-shop for valves, pumps, power units and proportional products-all assembled in the USA.
    Continental Hydraulics VED05M direct operated 4-way proportional valves conform to NFPA D05 and ISO 4401 mounting standards. These valves are designed to control the direction and oil flow rate based on the amount of current supplied to the solenoid. In event of a loss in electrical power, the centering springs will return the valve spool to the center position. The valve solenoids can be driven by a variable current power supply or by use of external Power Amplifier Cards designed to maximize the valve performance. A variety of manual overrides are also available.
  • PVX - Vane Pump
    ~ scroll down to find the part you need ~
    Continental Hydraulics are at the forefront of engineering hydraulic solutions for over 50 years-a testament to a long-standing reputation built upon your challenges and opportunities. A worldwide leader- a one-stop-shop for valves, pumps, power units and proportional products-all assembled in the USA.
    Continental Hydraulics PowrFlow™ PVR Vane Pumps deliver the rugged, reliable performance and value you've come to expect in all our products. They outperform sensitive piston pumps in harsh enviroments. PVX Vane Pumps deliver faster response, and require less external compensation compared to fixed displacement designs. The pumps are designed to meet requirements of the machine tool, general machinery and other markets where low noise, high performance and competitive pricing are needed.
    Note these improvements and features:
    •  Continuous duty ratings.
    •  Speed range 1150, 1450 and 1750 rpm.
    •  High efficiency at full flow.
    •  Quiet operation.
    •  Modern appearance.
    •  Improved ring and vane wear.
    •  Fast response and recovery times.
    •  Reduced envelope size.
    •  Improved controls with shock clipper.
    •  Conforms to the latest SAE, ISO, NFPA and ANSI standards.
    •  Allows full horsepower transference to pump 2 on tandem mounted pumps.
    •  3 year warranty.
    Benefits include:
    •  Competitively priced with other manufacturers of vane and axial piston pumps.
    •  Reduced sound levels help meet government and purchased sound requirements.
    •  High performance and long life design.
    •  Fast reaction time for critical system demands.
    •  Pressure compensated pumps controls delivery to circuit demands thereby conserving energy.
    •  Hydrodynamic journal bearings provide long life and quiet operation.
    • Repair kits are available from local distributor or the factory.
    •  Control option include single stage, two stage; load sensing, and torque limiting on most models.
    •  Shock clipper reduces shock pressure increasing system component life and stability.
  • Continental Hydraulics VER03MP - Directional Control Valve
    ~ scroll down to find the part you need ~
    Continental Hydraulics are at the forefront of engineering hydraulic solutions for over 50 years-a testament to a long-standing reputation built upon your challenges and opportunities. A worldwide leader- a one-stop-shop for valves, pumps, power units and proportional products-all assembled in the USA.
    The Continental Hydraulics VER03MP pilot operated proportional relief valves conform to NFPA R03/D03 and ISO 6264:1998 mounting standards. The VER03MP valves are designed to modulate pressure in a hydraulic circuit directly proportional to the input current to the valve. The valve consists of a proportional pilot relief stage and a main relief stage. The main stage has a spool which is held closed by a spring. System pressure acts on the opposite end of the spool opposing the spring force. When system pressure exceeds the spring force, the valve begins to open. The spring preload sets the minimum controlled pressure. System pressure can be increased from minimum by increasing the pilot pressure which adds to the spring force. The spool will tend to close until the system pressure reaches its new setting. There are four pressure ranges available: 70 bar, 140 bar, 210 bar and 350 bar with flow up to 13.2 gpm. It is an internally piloted valve with three drain options - internal through T port, external through A port and external through Y port. The valve can be driven by a variable current power supply or an external power amplifier card designed to maximize the valve’s performance.
  • ~ scroll down to find the part you need ~
    Continental Hydraulics are at the forefront of engineering hydraulic solutions for over 50 years-a testament to a long-standing reputation built upon your challenges and opportunities. A worldwide leader- a one-stop-shop for valves, pumps, power units and proportional products-all assembled in the USA.
    The Continental Hydraulics L Shaped power units feature flooded suction inlets. Since the pump doesn’t have to lift hydraulic fluid, it gets less wear and tear. L Shaped Power Units are ideal for industrial applications requiring high fluid volume and flow rate. The readily removable tank cover simplifies cleaning or replacing suction strainers. L-Shaped Power Units are the perfect choice for demanding high production industrial applications.
    Typical Applications
    • Door Panel Hemming Machines
    • Machine Tools and Machining Centers
    • Chassis Lift Systems
    • Brick Making Systems
  • Continental Hydraulics VSD03M - Directional Control Valve
    ~ scroll down to find the part you need ~
    Continental Hydraulics are at the forefront of engineering hydraulic solutions for over 50 years-a testament to a long-standing reputation built upon your challenges and opportunities. A worldwide leader- a one-stop-shop for valves, pumps, power units and proportional products-all assembled in the USA.
    The Continental Hydraulics VSD03M valves conform to NFPA D03 and ISO 4401 mounting standards. They are available in both 3 way and 4 way styles. All versions are available in 2 position spring offset, 2 position detent, 2 position spring centered and 3 position spring centered versions. A wide range of spools are available. Standard and CSA approved versions are available.
  • PR*W - Pilot Operated Pressure Relief Valve Series – In-Line Mounting
    ~ scroll down to find the part you need ~
    Continental Hydraulics are at the forefront of engineering hydraulic solutions for over 50 years-a testament to a long-standing reputation built upon your challenges and opportunities. A worldwide leader- a one-stop-shop for valves, pumps, power units and proportional products-all assembled in the USA.
    The Continental Hydraulics PR*W – PR*WU valves are pilot operated pressure relief valves, for in-line mounting with SAE straight threads. Available in two nominal sizes, each valve incorporates a main stage poppet with a conical seal design pilot section. The pilot section is controlled via internal or external pilot (X port). A hexagonal head screw controls the pressure adjustment. An optional solenoid valve expands the valve functionality by providing an unloading feature. In addition, two or three setting selectable pressures are realized by adding a modular relief valve between the pilot stage and the solenoid valve.
  • VED07M Proportional Pilot Operated Directional Control Valves
    ~ scroll down to find the part you need ~
    Continental Hydraulics are at the forefront of engineering hydraulic solutions for over 50 years-a testament to a long-standing reputation built upon your challenges and opportunities. A worldwide leader- a one-stop-shop for valves, pumps, power units and proportional products-all assembled in the USA.
    The Continental Hydraulics VED*M pilot operated 4-way proportional valves conform to NFPA and ISO 4401 mounting standard. These valves are designed to control the direction and oil flow rate based on the amount of current supplied to the solenoid. In event of a loss in electrical power, the centering springs will return the valve spool to the center position. The valve solenoids can be driven by a variable current power supply or by use of external Power Amplifier Cards designed to maximize the valves performance. A variety of manual overrides and a version with a pressure reducing valve are also available.
  • Continental Hydraulics HPV - Piston Pump
    ~ scroll down to find the part you need ~
    Continental Hydraulics are at the forefront of engineering hydraulic solutions for over 50 years-a testament to a long-standing reputation built upon your challenges and opportunities. A worldwide leader- a one-stop-shop for valves, pumps, power units and proportional products-all assembled in the USA.
    What Makes PowrFlow™ HPV Series Axial Piston Pumps Your Best Buy?
    Variable volume pressure compensated piston pumps match flow to system demand. Your system will generate less heat, and may not need a heat exchanger. Your system can be kept simpler too, with fewer valves and regulators, while still maintaining constant pressure. For long term reliability, and optimum performance,PowrFlow™ HPV Axial Piston Pumps are your best value.
    Direct Equivalent
    Replace your old Denison PV and Vickers PVB with the Continental HPV range of piston pumps. Output flow sizes are equal to the Denison and Vickers pumps including the 6, 10, 15, 20 and 29 gallons per minute @ 1750 RPM units.  Contact us with your Denison PV or Vickers PVB part number for a direct Continental hydraulics replacement pump.
    Features and Benefits
    • Simple Construction for long, dependable service.
    • More contamination-tolerant than competitive pumps to improve dependability and reduce maintenance costs.
    • Quiet operation simplifies meeting system sound level standards.
    • Economical - low overall cost for a high performance variable volume pump.
    • Efficient, energy-saving design.
  • VER03MPG Proportional Pressure Relief Valve Pilot Operated with on Board Electronics
    ~ scroll down to find the part you need ~
    Continental Hydraulics are at the forefront of engineering hydraulic solutions for over 50 years-a testament to a long-standing reputation built upon your challenges and opportunities. A worldwide leader- a one-stop-shop for valves, pumps, power units and proportional products-all assembled in the USA.
    The Continental Hydraulics VER03MPG pilot operated proportional relief valves conform to NFPA R03 / D03 and ISO 6264:1998 mounting standards. The VER03MPG valves have integral electronics on-board to maximize the valve’s performance. They are designed to modulate pressure in a hydraulic circuit directly proportional to the input command signal to the valve. Command signals available are 0 -10 VDC and 4 - 20 mA. The valve consists of a proportional pilot relief stage with on-board electronics and a main relief stage.The main stage has a spool which is held closed by a spring. System pressure acts on the opposite end of the spool opposing the spring force. When system pressure exceeds the spring force, the valve begins to open. The spring preload sets the minimum controlled pressure. System pressure can be increased from minimum by increasing the pilot pressure which adds to the spring force. The spool will tend to close until the system pressure reaches its new setting. There are four pressure ranges available: 70 bar, 140 bar, 210 bar and 350 bar with flow up to 13.2 gpm. It is an internally piloted valve with three drain options - internal through T port, external through A port and external through Y port.
  • ~ scroll down to find the part you need ~
    The Continental Hydraulics Little Champ ® Power Units are designed for use in locations where space is limited and larger, noiser power units are not needed. They’re ideal for applications requiring moderate fluid volume and flow rate, short hydraulic lines and quick cycling.
    Typical applications include use with:
    • Machine Tools
    • Packing Machinery
    • Food Processing
    • Material Handling
    Little Champ® Power Units are the perfect choice for applications involving frequent stops and starts, where localized power is needed, or where the noise and vibration of a large power unit would be distracting.
  • Continental Hydraulics VSD03M*-S – Directional Control Anti-Shock Valve
    ~ scroll down to find the part you need ~
    Continental Hydraulics are at the forefront of engineering hydraulic solutions for over 50 years-a testament to a long-standing reputation built upon your challenges and opportunities. A worldwide leader- a one-stop-shop for valves, pumps, power units and proportional products-all assembled in the USA.
    The Continental Hydraulics VSD03M*-S valves conform to NFPA D03 and ISO 4401 mounting standards. As the valve spool shifts, the spool lands cross-over the valve body ports. This can produce high instantaneous flow rates. The anti-shock valve provides a slow spool movement; slower than that of a standard directional valve. This results in reduction or elimination of hydraulic system shock produced by the spool movement and high flow rates.
  • PR*SP Pilot Operated Pressure Relief Valve Series
    ~ scroll down to find the part you need ~
    Continental Hydraulics are at the forefront of engineering hydraulic solutions for over 50 years-a testament to a long-standing reputation built upon your challenges and opportunities. A worldwide leader- a one-stop-shop for valves, pumps, power units and proportional products-all assembled in the USA.
    The Continental Hydraulics PR*SP valves are pilot operated pressure relief valves, for sub-plate mounting according to NFPA T3.5.1 and ISO 6264 standards. Available in three nominal sizes, each valve incorporates a main stage poppet with a conical seal design pilot section. The pilot section is controlled via internal or external pilot (X port). A hexagonal head screw controls the pressure adjustment. An optional solenoid valve expands the valve functionality by providing an unloading feature. In addition, two or three setting selectable pressures are realized by adding a modular relief valve between the pilot stage and the solenoid valve.
  • Continental Hydraulics - VED03MG Proportional Directional Control Valves with on Board Electronics
    ~ scroll down to find the part you need ~
    Continental Hydraulics are at the forefront of engineering hydraulic solutions for over 50 years-a testament to a long-standing reputation built upon your challenges and opportunities. A worldwide leader- a one-stop-shop for valves, pumps, power units and proportional products-all assembled in the USA.
    The Continental Hydraulics VED03MG direct operated 4-way proportional valves with On-Board Digital Amplifier conform to NFPA D03 and ISO 4401 mounting standards. These valves are designed to control the direction and oil flow rate based on the degree of command signal supplied to the On-Board Amplifier. In event of a loss in electrical power, the centering springs will return the valve spool to the center position. The On-Board microprocessor controls all the valve functions and is pre-set to optimal valve performance. In-field adjustments can be performed via software to customize the parameters based on your application needs. A variety of manual overrides are also available.
  • PVX - Vane Pump
    ~ scroll down to find the part you need ~
    Continental Hydraulics are at the forefront of engineering hydraulic solutions for over 50 years-a testament to a long-standing reputation built upon your challenges and opportunities. A worldwide leader- a one-stop-shop for valves, pumps, power units and proportional products-all assembled in the USA.
    Continental Hydraulics PowrFlow™ PVR Vane Pumps deliver the rugged, reliable performance and value you've come to expect in all our products. They outperform sensitive piston pumps in harsh enviroments. PVX Vane Pumps deliver faster response, and require less external compensation compared to fixed displacement designs. The pumps are designed to meet requirements of the machine tool, general machinery and other markets where low noise, high performance and competitive pricing are needed.
    Note these improvements and features:
    •  Continuous duty ratings.
    •  Speed range 1150, 1450 and 1750 rpm.
    •  High efficiency at full flow.
    •  Quiet operation.
    •  Modern appearance.
    •  Improved ring and vane wear.
    •  Fast response and recovery times.
    •  Reduced envelope size.
    •  Improved controls with shock clipper.
    •  Conforms to the latest SAE, ISO, NFPA and ANSI standards.
    •  Allows full horsepower transference to pump 2 on tandem mounted pumps.
    •  3 year warranty.
    Benefits include:
    •  Competitively priced with other manufacturers of vane and axial piston pumps.
    •  Reduced sound levels help meet government and purchased sound requirements.
    •  High performance and long life design.
    •  Fast reaction time for critical system demands.
    •  Pressure compensated pumps controls delivery to circuit demands thereby conserving energy.
    •  Hydrodynamic journal bearings provide long life and quiet operation.
    • Repair kits are available from local distributor or the factory.
    •  Control option include single stage, two stage; load sensing, and torque limiting on most models.
    •  Shock clipper reduces shock pressure increasing system component life and stability.
  • VER-SP Proportional Pilot Operated Pressure Relief Valves
    ~ scroll down to find the part you need ~
    Continental Hydraulics are at the forefront of engineering hydraulic solutions for over 50 years-a testament to a long-standing reputation built upon your challenges and opportunities. A worldwide leader- a one-stop-shop for valves, pumps, power units and proportional products-all assembled in the USA.
    The Continental Hydraulics VER-SP valves are Proportional pilot operated pressure relief valves with subplate mounting according to NFPA T3.5.1 R2-2002 and ISO 6264:1998 standards. Available in four proportional pressure ranges up to 5000 psi and in three nominal sizes for flow rates up to 132 gpm. The VER-SP valves are used to provide remote and variable pressure control in a hydraulic circuit. The pressure setting is directly proportional to the input current to the solenoid. The valve solenoid can be driven by a variable current power supply or by use of an external Power Amplifier Card designed to maximize the valves performance. They have a built-in manual relief valve that is factory set to the maximum value of the pressure control range.
  • ~ scroll down to find the part you need ~
    Continental Hydraulics are at the forefront of engineering hydraulic solutions for over 50 years-a testament to a long-standing reputation built upon your challenges and opportunities. A worldwide leader- a one-stop-shop for valves, pumps, power units and proportional products-all assembled in the USA.
    Zeus Hydratech is proud to distribute the range of Daman manifold blocks. Daman Products offers a complete line of manifolds, sub plates, adapters and cover plates that meet all ISO and NFPA standards. Their Standard Manifold Products Catalogue contains more than 1 million parts that facilitate the assembly of parallel or series circuit systems, ranging from ISO 02 valve patterns through ISO 10. With their unsurpassed level of expertise in manifold design and manufacturing, and commitment to providing excellent service, they are uniquely positioned to help our customers build better relationships, develop a reputation for reliability and, ultimately, win more work.
  • Continental Hydraulics VS6M - Solenoid Operated Directional Control Valve
    ~ scroll down to find the part you need ~
    Continental Hydraulics are at the forefront of engineering hydraulic solutions for over 50 years-a testament to a long-standing reputation built upon your challenges and opportunities. A worldwide leader- a one-stop-shop for valves, pumps, power units and proportional products-all assembled in the USA.
    The Continental Hydraulics VS6M valves are supplied with a ZINC-NICKEL PLATING making them the perfect choice for mobile and environmental applications that require better protection. Direct acting, subplate mounted directional control valve, with mounting surface according to NFPA D03 ISO 4401-03. The valve body is made with high strength iron castings with internal passages designed to minimize pressure drop. The valve can be supplied for valve functions requiring 2 positions or 3 positions, as well as 3 way or 4 way flow functions. This valve is designed using DC voltage core tubes. The DC core tubes will accept any one of the DIN 43650, AMP junior, DEUTSCH DT04-2P coil connections. These valves are supplied with a zinc-nickel surface treatment suitable to ensure a salt spray resistance up to 600h (test operated according to UNI EN ISO 9227 standards and test evaluation operated according to UNI EN ISO 10289 standards).
  • CEM-AC Single Channel Power Amplifier
    ~ scroll down to find the part you need ~
    Continental Hydraulics are at the forefront of engineering hydraulic solutions for over 50 years-a testament to a long-standing reputation built upon your challenges and opportunities. A worldwide leader- a one-stop-shop for valves, pumps, power units and proportional products-all assembled in the USA.
    The Continental Hydraulic CEM-AC power amplifier mounts directly to a single solenoid proportional valve coil with a DIN style connector, and will drive up to 2.5A. It is suitable to control current to either a proportional flow or pressure valve coil.
    A wide range of analog signals are accepted. There are two product choices for input; one accepts voltage commands, the other accepts current commands. These inputs are easily scaled to match system requirements. Two independent ramps are available for acceleration and deceleration control. Min and Max output current are adjustable. Output characteristics can be independently customized. The module is disabled if the coil outputs are shorted or open. If command current is outside of the proper range, the module is also disabled. PWM and Dither are user adjustable. This module is easily adapted to a variety of system requirements. All variables are user adjusted with easy to use software on your Microsoft Windows® laptop. Control variables are stored in non-volatile memory internal to the module. All variables can be read by the laptop, and reproduced exactly on other modules