Product Search  

Filter by Manufacturer:

Filter by Motor Type

Filter by Pump Type:

Filter by Oil Cooler Type

Filter by Pressure Relief Type:

Active Filters

  • Daikin JCP - Pilot Check Valve
    ~ scroll down to find the part you need ~
    Market leaders in environmentally responsible heat pumps, ventilation and air conditioning systems for domestic, commercial and industrial applications.
    When the JCP Pilot Check Valve pressure reaches a cracking pressure, it pushes a check valve to open and let oil flow only to one direction. Besides, oil can flow to reverse direction by pushing up the check valve caused by external pilot pressure. Decompression type, which opens a small check valve before a main valve will open, is available.
  • Daikin JQ - Pressure Control Valve
    ~ scroll down to find the part you need ~
    Market leaders in environmentally responsible heat pumps, ventilation and air conditioning systems for domestic, commercial and industrial applications.
    The Daikin JQ Pressure Control Valve is a direct acting valve which can be used for a sequence valve, an unload valve, a counter balance valve and a relief valve in a combination of either internal or external pilot and drain.
  • Daiken-AKZ439
    ~ scroll down to find the part you need ~
    Daikin Industries are the market leaders in environmentally responsible hydraulic pumps, valves and power packs for commercial and industrial applications. Daikin have focused on the process lines in a factory where 45% energy is consumed generally. Daikin's unique oil hydraulic systems which integrates oil hydraulic control and inverter motor technologies will be able to reduce power consumption significantly.
    High accuracy oil temperature control
    Acclaimed ±0.1°C oil temperature control has been extended to cover an even wider range.
     Refrigerant gas leakage detection alarm function
    An alarm signal is output when the refrigerant gas would be leaked (as cooling circuit failure).
    Oil temperature warning function
    A warning signal can be output when the oil temperature or air temperature strays outside arbitrarily setting range.
    Auto tuning function
    This function substantially cuts the time taken for adjustment during trial operation by automatically setting the gain when oil temperature control is not stable in the factory setting status or when optimization is required.
    999-hour timer function (ON timer)
    The operation start time can be set from 0 to 999 hours in one-hour units.
    Preventive maintenance function
    A warning signal is output to notify that maintenance is required when the air filter or condenser becomes clogged. If the thermistor fails (out of control), emergency operation is possible by selecting another operation mode. This function minimizes the factors of line stoppages.
    The control panel has been revamped.
    Data is now displayed in an easier-to-understand format with more digits space. The power consumption is also displayed.
  • Daikin EcoRich - Hydraulic Unit
    Daikin's lightweight design incorporates energy saving motor technology to significantly reduce energy consumption. High performance components deliver strong flow and pressure carefully packaged in a compact design. IMPORTANT UPDATE: The 30 series shown on this page will no longer be manufactured from September 2017, the 40 series is the direct replacement  - Contact us to confirm the correct part number to replace your old 30 series unit.
    The Daikin EHU series power pack units are used extensively in many machine tool centers from the following manufacturers: Doosan, Makino, Citizen, Hyundai, Mazak and Traub Index. The following special versions are also available directly from Zeus Hydratech Ltd. OEM Specials:
    • EHU30-M07-AE-30-V-169A
    • EHU30-M07-AE-30-V-088
    • EHU30-M07-AE-30-V-024
    • EHU25-M07-AE-30-V344
    • EHU25-M07-AE-30-V-300
    • EHU25-M07-AE-30-V-118
    • EHU25-L07-A-30-008A
    • EHU25-L04-A-30-127E
    • EHU25-L04-A-30-127D
    • EHU25-L04-A-30-127C
    • EHU25-L04-A-30-032
    • EHU25-L04-A-30-019D
      *All standard Part Numbers and specifications listed below*
  • Daikin M Series - Motor Pump
    ~ scroll down to find the part you need ~
    Market leaders in environmentally responsible heat pumps, ventilation and air conditioning systems for domestic, commercial and industrial applications.
    The Daikin M Series Motor pumps integrate with a V series piston pump and an electric motor in one body. The integrated configuration saves you the trouble of centering .
  • Daikin JR - Direct Operated Relief Valve
    ~ scroll down to find the part you need ~
    Market leaders in environmentally responsible heat pumps, ventilation and air conditioning systems for domestic, commercial and industrial applications.
    The Daikin JR Direct Operated Relief Valve is used in remote control mode after connecting to a vent port of a pilot operated pressure control valve such as a relief valve, a reducing valve, etc
  • Daikin's new 40 series EHU power pack unit features IPM (Interior Permanent Magnet) technology derived from their range of air conditioning units, the result is a 30% reduction in power consumption and 9% weight saving over the previous 30 series model. High performance components deliver improved flow and pressure in a new compact design with improved control options. IMPORTANT UPDATE: The 40 series shown on this page replaces the old 30 series (which ceased production in September 2017) To replace your old 30 series  power pack unit, please contact us to confirm the correct part number and specification.
    The Daikin EHU 30 series power pack units are used extensively in many machine tool centers from the following manufacturers: Doosan, Makino, Citizen, Hyundai, Mazak and Traub Index. The following special versions are also available directly from Zeus Hydratech Ltd. OEM Specials:
    • EHU30-M07-AE-30-V-169A
    • EHU30-M07-AE-30-V-088
    • EHU30-M07-AE-30-V-024
    • EHU25-M07-AE-30-V344
    • EHU25-M07-AE-30-V-300
    • EHU25-M07-AE-30-V-118
    • EHU25-L07-A-30-008A
    • EHU25-L04-A-30-127E
    • EHU25-L04-A-30-127D
    • EHU25-L04-A-30-127C
    • EHU25-L04-A-30-032
    • EHU25-L04-A-30-019D
      *All standard Part Numbers and specifications listed below*
  • Daikin JS - Solenoid Operated Directional Control Valve
    ~ scroll down to find the part you need ~
    Market leaders in environmentally responsible heat pumps, ventilation and air conditioning systems for domestic, commercial and industrial applications.
    The Daikin JS Solenoid Controlled Directional Control Valve adopts a high reliable KSO-G02, it prolongs life and can be securely operated. In addition the valve structure is both dust and water-proof complying with IEC Pu529 and Ip65, it best suits the products coping with The Europe safety standards (CE).
  • Daikin TM Series - Positioning Motor
    ~ scroll down to find the part you need ~
    Market leaders in environmentally responsible heat pumps, ventilation and air conditioning systems for domestic, commercial and industrial applications.
    Oil hydraulic mechanism
    The system deciding a revolution's position of hydraulic mechanism developed by our own technologies based on the orbit motor of low speed with high torque and low noise.
    Small & compact
    Built in the mechanism concerning to a revolution, reducing speed and deciding position of revolution. The small sized unit that all components are integrated into one equipment without piping.
    Indexing shorten time
    With the good response of the built-up process and with the adoption of the reduction speed cam and the mechanic valve, the precise speed reduction can be obtained. Accordingly, the shock-less cease can be done in a short time without miss-index.
    High accuracy positioning
    There are three kinds indexing number 1/rev, 2/rev, 3/rev, while there are two kinds of groove shapes for positioning, V groove with high accuracy (±0.1°) and R groove with loose angle for an auxiliary positioning purpose.
    Simple control & Simple handling
    Since it is actuated only by ON/OFF of solenoid valve, the control and handling is vary simple.
    Any choice of forwarding pitch
    The any choice of forwarding pitch makes it possible to carry out a smooth pitch forwarding.
  • Daikin EPD & EPK - Open Loop Control Method Euro-Card Datasheet
    ~ scroll down to find the part you need ~
    Market leaders in environmentally responsible heat pumps, ventilation and air conditioning systems for domestic, commercial and industrial applications.
    • The Daikin EPD & EPK Open Loop Control Method Euro Card Controls the KSP valve of an open look control system to optimum conditions.
    • Owing to the constant-current characteristics, the variations of supply voltage and of current by a solenoid temperature rise rarely happens.
    • The output radio wave corrugation (dither frequency, amplitude) is set up so that hysteresis of a solenoid proportional control valve and a resolution power can get the best values.
    • Since the current is controlled by PWM (pulse width modulation) method, heat generation from driver is restrained to be the smallest.
    • As the function (response time adjusting function) to vary the output current slowly for the variation of step like command input is provided, it enables the oil output to vary in shock-less. (for either build-up or pull-down process, each process can be independently adjusted).
  • Daikin EcoRich - Hydraulic Unit
    Daikin's lightweight design incorporates energy saving motor technology to significantly reduce energy consumption. High performance components deliver strong flow and pressure carefully packaged in a compact design. IMPORTANT UPDATE: The 30 series shown on this page will no longer be manufactured from September 2017, the 40 series is the direct replacement  - Contact us to confirm the correct part number to replace your old 30 series unit.
    The Daikin EHU series power pack units are used extensively in many machine tool centers from the following manufacturers: Doosan, Makino, Citizen, Hyundai, Mazak and Traub Index. The following special versions are also available directly from Zeus Hydratech Ltd. OEM Specials:
    • EHU30-M07-AE-30-V-169A
    • EHU30-M07-AE-30-V-088
    • EHU30-M07-AE-30-V-024
    • EHU25-M07-AE-30-V344
    • EHU25-M07-AE-30-V-300
    • EHU25-M07-AE-30-V-118
    • EHU25-L07-A-30-008A
    • EHU25-L04-A-30-127E
    • EHU25-L04-A-30-127D
    • EHU25-L04-A-30-127C
    • EHU25-L04-A-30-032
    • EHU25-L04-A-30-019D
      *All standard Part Numbers and specifications listed below*
  • Daikin JCA - Light Angle Check Valve
    Installed in a hydraulic line perpendicular to the line, the check valve opens when the pressure reaches the cracking pressure, allowing fluid to flow only in one direction and blocking the flow in the reverse direction
    Valves of cracking pressure type "0" (cracking pressure of 0 MPa {0 kgf/cm2}) need to be installed with the inlet port facing downward. The gasket mount type valves need to be installed with the gasket mating face downward (horizontal orientation)
  • Daikin JQ - Pressure Control Valve
    ~ scroll down to find the part you need ~
    Market leaders in environmentally responsible heat pumps, ventilation and air conditioning systems for domestic, commercial and industrial applications.
    The Daikin JQ Pressure Control Valve is a direct acting valve which can be used for a sequence valve, an unload valve, a counter balance valve and a relief valve in a combination of either internal or external pilot and drain.
  • Daiken-AKZ439
    ~ scroll down to find the part you need ~
    Daikin Industries are the market leaders in environmentally responsible hydraulic pumps, valves and power packs for commercial and industrial applications. Daikin have focused on the process lines in a factory where 45% energy is consumed generally. Daikin's unique oil hydraulic systems which integrates oil hydraulic control and inverter motor technologies will be able to reduce power consumption significantly.
    High accuracy oil temperature control
    Acclaimed ±0.1°C oil temperature control has been extended to cover an even wider range.
     Refrigerant gas leakage detection alarm function
    An alarm signal is output when the refrigerant gas would be leaked (as cooling circuit failure).
    Oil temperature warning function
    A warning signal can be output when the oil temperature or air temperature strays outside arbitrarily setting range.
    Auto tuning function
    This function substantially cuts the time taken for adjustment during trial operation by automatically setting the gain when oil temperature control is not stable in the factory setting status or when optimization is required.
    999-hour timer function (ON timer)
    The operation start time can be set from 0 to 999 hours in one-hour units.
    Preventive maintenance function
    A warning signal is output to notify that maintenance is required when the air filter or condenser becomes clogged. If the thermistor fails (out of control), emergency operation is possible by selecting another operation mode. This function minimizes the factors of line stoppages.
    The control panel has been revamped.
    Data is now displayed in an easier-to-understand format with more digits space. The power consumption is also displayed.
  • Daikin M Series - Motor Pump
    ~ scroll down to find the part you need ~
    Market leaders in environmentally responsible heat pumps, ventilation and air conditioning systems for domestic, commercial and industrial applications.
    The Daikin M Series Motor pumps integrate with a V series piston pump and an electric motor in one body. The integrated configuration saves you the trouble of centering .
  • Daikin JRS - Relief Valve with Solenoid Operated Valve
    ~ scroll down to find the part you need ~
    Market leaders in environmentally responsible heat pumps, ventilation and air conditioning systems for domestic, commercial and industrial applications.
    • The Daikin JRS Relief Valve has a broad flow rate range enables the steady pressure control and this valve actuates as a safety valve.
    • As this valve itself has a function as an unloading valve, an unloading circuit becomes no need.
    • Option for high vent type is available.
  • Daikin's new 40 series EHU power pack unit features IPM (Interior Permanent Magnet) technology derived from their range of air conditioning units, the result is a 30% reduction in power consumption and 9% weight saving over the previous 30 series model. High performance components deliver improved flow and pressure in a new compact design with improved control options. IMPORTANT UPDATE: The 40 series shown on this page replaces the old 30 series (which ceased production in September 2017) To replace your old 30 series power pack unit, please contact us to confirm the correct part number and specification.
    The Daikin EHU 30 series power pack units are used extensively in many machine tool centers from the following manufacturers: Doosan, Makino, Citizen, Hyundai, Mazak and Traub Index. The following special versions are also available directly from Zeus Hydratech Ltd. OEM Specials:
    • EHU30-M07-AE-30-V-169A
    • EHU30-M07-AE-30-V-088
    • EHU30-M07-AE-30-V-024
    • EHU25-M07-AE-30-V344
    • EHU25-M07-AE-30-V-300
    • EHU25-M07-AE-30-V-118
    • EHU25-L07-A-30-008A
    • EHU25-L04-A-30-127E
    • EHU25-L04-A-30-127D
    • EHU25-L04-A-30-127C
    • EHU25-L04-A-30-032
    • EHU25-L04-A-30-019D
      *All standard Part Numbers and specifications listed below*
  • Daikin JSC - Solenoid Operated Valve
    ~ scroll down to find the part you need ~
    Market leaders in environmentally responsible heat pumps, ventilation and air conditioning systems for domestic, commercial and industrial applications.
    With the JSC Seat Style Solenoid Operated Valve Fluid adhering phenomena will never happen even if it is used for long time in pressurized condition.
  • Daikin HDRIR - Direct Operated Relief Valve
    ~ scroll down to find the part you need ~
    Market leaders in environmentally responsible heat pumps, ventilation and air conditioning systems for domestic, commercial and industrial applications.
    As the Daikin HDRIR - Direct Operated Relief Valve override pressure is small, this valve has an almost equivalent performance to a pilot operated type. The vibration proof structure makes it possible to prevent chattering even in high pressure.
  • Daikin EPKD - Minor Loop Control Method Euro-Card
    ~ scroll down to find the part you need ~
    Market leaders in environmentally responsible heat pumps, ventilation and air conditioning systems for domestic, commercial and industrial applications.
    • The Daikin EPKD Minor Loop Control Method Euro Card controls the LEM valve which detects the spool position by a differential transformer to carry out a feed back control (minor feed back).
    • Owing to the constant-current characteristics, the variations of the supply voltage and output current by a solenoid can cause a temperature rise but this rarely happens.
    • The output radio wave corrugation (dither frequency, amplitude) is et up so that the hysteresis of a solenoid proportional control valve and a resolution power can get the best values.
    • Since the current is controlled by PWM (pulse width modulation) method, heat generation from the drive is reduced to a small amount.
    • As the function (response time adjusting function) varies the output current slowly for the the  variation of step like command input is provided, it enables the oil output to vary in shock-less. (for either build-up or pull-down process, each process can be independently adjusted).
  • Daikin EcoRich - Hydraulic Unit
    Daikin's lightweight design incorporates energy saving motor technology to significantly reduce energy consumption. High performance components deliver strong flow and pressure carefully packaged in a compact design. IMPORTANT UPDATE: The 30 series shown on this page will no longer be manufactured from September 2017, the 40 series is the direct replacement  - Contact us to confirm the correct part number to replace your old 30 series unit.
    The Daikin EHU series power pack units are used extensively in many machine tool centers from the following manufacturers: Doosan, Makino, Citizen, Hyundai, Mazak and Traub Index. The following special versions are also available directly from Zeus Hydratech Ltd. OEM Specials:
    • EHU30-M07-AE-30-V-169A
    • EHU30-M07-AE-30-V-088
    • EHU30-M07-AE-30-V-024
    • EHU25-M07-AE-30-V344
    • EHU25-M07-AE-30-V-300
    • EHU25-M07-AE-30-V-118
    • EHU25-L07-A-30-008A
    • EHU25-L04-A-30-127E
    • EHU25-L04-A-30-127D
    • EHU25-L04-A-30-127C
    • EHU25-L04-A-30-032
    • EHU25-L04-A-30-019D
      *All standard Part Numbers and specifications listed below*
  • Daikin JCP - Pilot Check Valve
    ~ scroll down to find the part you need ~
    Market leaders in environmentally responsible heat pumps, ventilation and air conditioning systems for domestic, commercial and industrial applications.
    When the JCP Pilot Check Valve pressure reaches a cracking pressure, it pushes a check valve to open and let oil flow only to one direction. Besides, oil can flow to reverse direction by pushing up the check valve caused by external pilot pressure. Decompression type, which opens a small check valve before a main valve will open, is available.
  • Daikin JQ - Pressure Control Valve
    ~ scroll down to find the part you need ~
    Market leaders in environmentally responsible heat pumps, ventilation and air conditioning systems for domestic, commercial and industrial applications.
    The Daikin JQ Pressure Control Valve is a direct acting valve which can be used for a sequence valve, an unload valve, a counter balance valve and a relief valve in a combination of either internal or external pilot and drain.
  • Daiken-AKZ149
    Market leaders in environmentally responsible heat pumps, ventilation and air conditioning systems for domestic, commercial and industrial applications.
    High accuracy oil temperature control
    Acclaimed ±0.1°C oil temperature control has been extended to cover an even wider range.
     Refrigerant gas leakage detection alarm function
    An alarm signal is output when the refrigerant gas would be leaked (as cooling circuit failure).
    Oil temperature warning function
    A warning signal can be output when the oil temperature or air temperature strays outside arbitrarily setting range.
    Auto tuning function
    This function substantially cuts the time taken for adjustment during trial operation by automatically setting the gain when oil temperature control is not stable in the factory setting status or when optimization is required.
    999-hour timer function (ON timer)
    The operation start time can be set from 0 to 999 hours in one-hour units.
    Preventive maintenance function
    A warning signal is output to notify that maintenance is required when the air filter or condenser becomes clogged. If the thermistor fails (out of control), emergency operation is possible by selecting another operation mode. This function minimizes the factors of line stoppages.
    The control panel has been revamped.
    Data is now displayed in an easier-to-understand format with more digits space. The power consumption is also displayed.
  • Daikin NDJ Series - DAIPACK Oil Cooler
    ~ scroll down to find the part you need ~
    Market leaders in environmentally responsible heat pumps, ventilation and air conditioning systems for domestic, commercial and industrial applications.
    Low Noise
    In the Daikin NDJ Series the pump and a motor are placed inside a tank, the tank itself plays a role of sound attenuate and noise cannot be leaked out.
    Low Oil Temperature Rise
    Since a hollow tank with wide area of heat emission is adopted, a motor cooling fan forcefully cools both internal wall of a tank and pump surface to restrain oil temperature rise.
    Compact Design
    Compact design enables a installation space to reduce.
  • Daikin JRSS - Relief Valve with a Solenoid Valve
    ~ scroll down to find the part you need ~
    Market leaders in environmentally responsible heat pumps, ventilation and air conditioning systems for domestic, commercial and industrial applications.
    • The Daiking JRSS Relief Valve has a broad flow rate range enables the steady pressure control.
    • This valve will have a function of an unloading valve, if a vent port is used.
    • The switching of the solenoid operated valve enables the circuit unloading, dual pressure control and triple pressure control.
    • The Low noise models with high characteristics against noise.
    • Option for high vent type is available.
  • Daiken-AKZ149
    Circulation type oil cooling units for spindle and lubricant that achieve high energy saving rates, low noise, and high-accuracy temperature control.
    High accuracy oil temperature control
    Acclaimed ±0.1°C oil temperature control has been extended to cover an even wider range.
    Refrigerant gas leakage detection alarm function
    An alarm signal is output when the refrigerant gas would be leaked (as cooling circuit failure).
    Oil temperature warning function
    A warning signal can be output when the oil temperature or air temperature strays outside arbitrarily setting range.
    Auto tuning function
    This function substantially cuts the time taken for adjustment during trial operation by automatically setting the gain when oil temperature control is not stable in the factory setting status or when optimization is required.
  • Daikin KSH - Solenoid Controlled Pilot Operated Directional Control Valve
    ~ scroll down to find the part you need ~
    Market leaders in environmentally responsible heat pumps, ventilation and air conditioning systems for domestic, commercial and industrial applications.
    The Daikin KSH Pilot Operated Directional Control Valve, sustains high pressure and has a large flow rate such as 35MPa {350kgf/cm2}, 300L/min. The valve structure is both dust and water-proof complying with IEC Pub 529 IP65, but also coping with Europe safety standards (CE). Due to a check valve being built-in pilot pressure is available, therefore a resistance valve for raising pilot pressure is not necessary. A hydro-center type is required, when the main valve spool returns to the neutral position securely.
  • Daikin HDRI - Pilot Operated Relief Valve
    ~ scroll down to find the part you need ~
    Market leaders in environmentally responsible heat pumps, ventilation and air conditioning systems for domestic, commercial and industrial applications.
    The Daikin HDRI - Pilot Operated Relief Valve broad flow rate range enables the steady pressure control and this valve actuates as a safety valve. If a remote control relief valve is connected to a vent port, the main circuit pressure can be controlled by a remote controller. This valve will have a function of an unloading valve, if a vent port is used. Option for high vent type is available.
  • Daikin JSES - Solenoid Pilot Type Servo Valve
    ~ scroll down to find the part you need ~
    Market leaders in environmentally responsible heat pumps, ventilation and air conditioning systems for domestic, commercial and industrial applications.
    • The Daikin JSES Solenoid Pilot Type Valve suits a closed loop control of position, speed and pressure of the main machine's actuator.
    • As a pilot valve adopts large sized orifice nozzle for a nozzle flapper type, anti-contaminant characteristics is strengthened.
    • a drive is mounted on the valve.
    • The option of including a pressure sensor is available to allow closed loop control.