Single Pilot Operated Check Valve Line Mounting

Installation information

Connect the actuator port to be controlled to ‘A2’ and the pressure flow to ‘A1’. Other ports ‘U1’ or ‘U2’ can be connected with pilot pressure in the same way.

Features

• Steel Body
• Yellow Zinc Plated
• No Leakage
• Cracking pressure 4 BAR

Operation

When the first actuator exceeds the pre-set pressure, the valve opens and allows flow to second actuator. To adjust the setting of the spring, remove the cap from the end of the cartridge and adjust clockwise to increase the setting and anti-clockwise to reduce the setting. A free flow check allows reverse flow from port ‘T’ to port ‘P’. Setting range 40 to 210 BAR.