| |
Suction Strainers for Filtering Hydraulic
Reservoirs
Features
Donaldson Suction Strainers filter petroleum-based hydraulic fluids,
phosphate esters, water glycols, lubricating oils, coolants, fuels
and water in fluid reservoirs, sumps, and similar applications.
- Flow Range: 0-600 gpm / 0-2,274 l/min
- Outlet port Size: 3/8" NPT to 6" NPT
- Meets J.I.C. Standards
- One piece construction
- Available with or without relief valve
- Stainless steel mesh
- Steel or Nylon fittings
- Operating temperatures: 250oF / 121 oC
(Steel fitting), 210oF / 100oC (Nylon fitting)
- Plated perforated steel center core epoxy bonded to heavy gauge
connector and end caps
- Reusable! Clean by swishing in non-caustic solvent, then blow
from inner diameter to outer diameter with compressed air.
On suction lines in hydraulic systems, the recommended flow velocity
is 5 ft./sec. maximum. A clean filter with 225 SSU oil @ 100ºF
and a flow velocity of 5 ft./sec. will not exceed a pressure drop
of 0.35 psi.
|
|
|
