Product Search  

  • CEM-AC Single Channel Power Amplifier
  • CEM-AC Single Channel Power Amplifier Functional Diagram

Continental Hydraulics CEM-AC – Single Channel Power Amplifier

~ scroll down to find the part you need ~
Continental Hydraulics are at the forefront of engineering hydraulic solutions for over 50 years-a testament to a long-standing reputation built upon your challenges and opportunities. A worldwide leader- a one-stop-shop for valves, pumps, power units and proportional products-all assembled in the USA.

The Continental Hydraulic CEM-AC power amplifier mounts directly to a single solenoid proportional valve coil with a DIN style connector,
and will drive up to 2.5A. It is suitable to control current to either a proportional flow or pressure valve coil.

A wide range of analog signals are accepted. There are two product choices for input; one accepts voltage commands,
the other accepts current commands. These inputs are easily scaled to match system requirements. Two independent ramps are available for acceleration and deceleration control.

Min and Max output current are adjustable. Output characteristics can be independently customized. The module is disabled
if the coil outputs are shorted or open. If command current is outside of the proper range, the module is also disabled. PWM and Dither are user adjustable.

This module is easily adapted to a variety of system requirements. All variables are user adjusted with easy to use
software on your Microsoft Windows® laptop. Control variables are stored in non-volatile memory internal to the module. All variables can be read by the laptop,
and reproduced exactly on other modules

Product Specification

Description Units
Power Supply VDC 12 to 30 vDC
Power Supply Consumption <100mA + Solenoid
Power Supply External Fuse 3 A (Medium Action)
Analog Input Voltage 0 – +10 vDC
Analog Input Impendance 90 K Ohms
Analog Input Current 4 to 20 mA
Analog Input Impendance 390 Ohm
Analog Input Resolution <0.1 %
Analog Sample Time 1.0 mS
Solenoid Output 1.2 or 2.5 A (Software Select-able)
Solenoid Output PWM Frequency 60 to 2650 Hz
Solenoid Output Dither Frequency 60 to 400 Hz
Solenoid Output Dither Amplitude 0 to 30 %
Solenoid Output Sample Time 0.17 mS
Electrical Connection Power and Signal M12 5 pin male key style A
Electrical Connection Communication LIN bus
Electrical Connection Ground via Din coil pin
Housing Attached to DIN 43650 coil
Housing Material Polyamide PA
Housing Combustibility Class UL94 V1
Housing Protection Class IP 65 (with gasket)
Housing Working Temperature -20 to +60 °C
Housing Storage Temperature -20 to +70 °C
Housing Humdity 95% (non condensing)
Housing Electron Magnetic Compatibility Emission
EN 61000-6-2
Housing Electron Magnetic Compatibility Immunity
EN 61000-6-3
Housing Electron Magnetic Compatibility

Vibration Resistance
EIC 60068-2-6

Continental Hydraulics – CEM – Open and Closed Loop Control Modules Data Sheet

Continental Hydraulics – CEM – Open and Closed Loop Control Modules Setup Software

Continental Hydraulics – CEM – Open and Closed Loop Control Modules User Manual

Additional Information

Manufacturer

Continental Hydraulics

Electronic Control Modules

Plug Version Amplifiers

Reviews

There are no reviews yet.

Be the first to review “Continental Hydraulics CEM-AC – Single Channel Power Amplifier”

Your email address will not be published. Required fields are marked *