Product Search  

  • Duplomatic IGP - Gear Pump
  • Duplomatic IGP Ordering Information
  • Duplomatic IGP3 Mounting Dimensions
  • Duplomatic IGP4 Mounting Dimensions
  • Duplomatic IGP5 Mounting Dimensions
  • Duplomatic IGP6 Mounting Dimensions
  • Duplomatic IGP33 Double Pump Mounting Dimensions
  • IGP43 Double Pump Mounting Dimensions
  • IGP44 Double Pump Mounting Dimensions
  • IGP53 Double Pump Mounting Dimensions
  • IGP54 Double Pump Mounting Dimensions
  • IGP55 Double Pump Mounting Dimensions
  • IGP65 Double Pump Mounting Dimensions
  • IGP66 Double Pump Mounting Dimensions
  • IGP75 Double Pump Mounting Dimensions
  • IGP76 Double Pump Mounting Dimensions
  • IGP77 Double Pump Mounting Dimensions

Duplomatic IGP – Internal Gear Pumps

~ scroll down to find the part you need ~
Duplomatic Oleodinamica represents the real alternative in the hydraulics market.

Duplomatic’s wide range of products and worldwide service network, grant its users a real competitive advantage.

The Duplomatic IGP pumps are volumetric displacement pumps with internal gears, available in five sizes, each divided into a range of different displacement.

  • The pumps feature high volumetric performance levels, thanks to both radial and axial compensation in proportion to operating pressure, in addition to low noise levels.
  • Optimal load distribution and special friction bearings enable continuous duty at high pressures and ensure extended pump lifetime.
  • IGP pumps are also available in multiple versions which can be combined to make multi-flow groups.

Product Specification

Description 3 4 5 6 7
Displacement Range  3,6 ÷ 10,2 cm³/rev 13,3 ÷ 32,6 cm³/rev 33,1 ÷ 64,9 cm³/rev 64,1 ÷ 126,2 cm³/rev 125,8 ÷ 251,7 cm³/rev
Flow Rate Range (at 1,500 RPM) 5,4 ÷ 15,3 l/min  19,9 ÷ 48,9 l/min  49,6 ÷ 97,3 l/min  96,1 ÷ 189,3 l/min  188,7 ÷ 377,5 l/min
Rotation Direction  Clockwise or Anticlockwise (Seen from the Shaft Side)  Clockwise or Anticlockwise (Seen from the Shaft Side)  Clockwise or Anticlockwise (Seen from the Shaft Side)  Clockwise or Anticlockwise (Seen from the Shaft Side)  Clockwise or Anticlockwise (Seen from the Shaft Side)
Loads on the Shaft  Consult our Technical Department for the Extent of Axial and Radial loads  Consult our Technical Department for the Extent of Axial and Radial loads  Consult our Technical Department for the Extent of Axial and Radial loads   Consult our Technical Department for the Extent of Axial and Radial loads   Consult our Technical Department for the Extent of Axial and Radial loads
Hydraulic Connection  Flanged fittings SAE J518 c Code 61  Flanged fittings SAE J518 c Code 61  Flanged fittings SAE J518 c Code 61  Flanged fittings SAE J518 c Code 61  Flanged fittings SAE J518 c Code 61
Type of Fastening  Flanged SAE J744 c  Flanged SAE J744 c  Flanged SAE J744 c   Flanged SAE J744 c   Flanged SAE J744 c
Mass (Single Pump)  4 ÷ 4,8 kg 8,6 ÷ 11 kg 15,5 ÷ 18,7 kg  29,2 ÷ 35 kg  46,5 ÷ 59 kg
Ambient Temperature Range  -10 / +60 °C  -10 / +60 °C  -10 / +60 °C  -10 / +60 °C  -10 / +60 °C
Fluid Temperature Range  -10 / +80 °C  -10 / +80 °C  -10 / +80 °C -10 / +80 °C -10 / +80 °C
Recommended True Viscosity  25 ÷ 100 cSt  25 ÷ 100 cSt  25 ÷ 100 cSt  25 ÷ 100 cSt 25 ÷ 100 cSt

Duplomatic – IGP – Internal Gear Pumps – Data Sheet

Additional Information

Hydraulic Pump Units

Gear Pump

Manufacturer

Duplomatic

Hydraulic Vane Pumps

Single Vane Pump

Reviews

There are no reviews yet.

Be the first to review “Duplomatic IGP – Internal Gear Pumps”

Your email address will not be published. Required fields are marked *

Have a Question? Submit it here!

*
*

*