Need help? Contact Us +44 (0) 1172 130042

SUT00S3010-30 Daikin Super Unit - Hydraulic Power Pack

Daikin
Contact us for current availability
View all specifications

SUT00S3010-30 Super Unit - Hydraulic Power Pack

Daikin's Super Unit has turned the conventional industrial hydraulic power pack on its head and made it into something very special indeed.

We live in a world that demands significant reductions in energy consumption. Conventional hydraulic power pack units utilised within industrial applications unnecessarily consume large amounts energy due to the nature of their design and configuration.

Daikin utilise their high efficiency interior permanent magnet (IPM) motor technology (previously pioneered and utilised in their successful air conditioning units) to give a variable speed drive solution to their hydraulic power pack. IPM motors operate at a 93% efficiency which is considerably more efficient than a conventional induction motor (typically 70-80%) In addition to their efficiency, IPM motors also give huge improvements in torque output during their required operating RPM, this results in a consistent pressure output from the hydraulic gear pump even at varying flow demands.

Daikin offer a broad range of Super Units to choose from (14 models in total)

Flow range: 15 ~ 110 litres/minute.

Operating pressure range: 70 ~ 206 bar



 
Product Features
  • Energy Saving - high effieciency IPM motors provide huge savings (typically 50%) 
  • Low noise (just 60dB at 206 bar with the double pump unit) 
  • Multi stage pressure/flow rate control - sixteen pressure (P) and flow (Q) settings are avaiable
  • Maintenence/management function - Internal data of the super unit can be managed via using a connected laptop
  • Excluded from high-efficiency motor regulations - Super units that incorporate IPM motors are excluded from these regulations
  • Reduce your control valves! Using on-board parameter settings, conventional flow and pressure control valves are not required
  • Remote control operation - PLC compatible through RS232C serial communication 
  • Analog command input - Enables continious control of pressure & speeds as required 

Looking to repair your Daikin Super Unit?

We carry a broad range of spares for the Daikin Super Unit so if you either wish to repair your unit yourself or would like us to do it for you, we're able to assit.   Please call +44(0)1172 130042 or Email with your Super Unit part number and serial number to discuss your requirements.  


Tankless type

Super unit  - Part Number:  SUT00S1507-30 SUT00S3007-30 SUT00S4007-30 SUT00S6007-30 SUT00S8007-30 SUT00S11007-30
Pump unit Max flow rate (theoretical value l/min) 15.2 28.5 39.7 61.1 83.0 110
Max operating pressure (Bar) 70 70 70 70 70 70
Operating flow rate adjustment range l/min 2.5 ~ 15.2 3.5 ~ 28.5 5.3 ~ 39.7 8.7 ~ 61.1 11.6 ~ 83.0 13.3 ~ 110
Operating pressure adjustment range (Bar) 15 ~ 70 15 ~ 70 15 ~ 70 1.5 ~ 70 15 ~ 70 15 ~ 70
Motor capacity Motor capacity (equivelant KW) Equivelant to 2.2 KW Equivelant to 2.8 KW Equivelant to  3.7 KW Equivelant to 5.0 KW Equivelant to 7.0 KW Equivelant to  11.0 KW
Power supply Motor/pump unit 3-phase, 200V (50Hz), 200V (60Hz), 220V (60Hz) (Permissable voltage function +/- 10%) 
Rated current (A) AC3 200V (50Hz) 11.5 15.4 16.1 22.1 25.5 38.3
AC3 200V (60Hz) 11.3 15.1 15.8 21.7 24.8 37.8
AC3 220V (60Hz) 10.6 13.8 14.8 20.2 22.7 34.9
Power source breaker setting (A) 15 20 20 30 50 75
External Input signal 5 channels
Photo-coupler insulation, DC 24V (DC 27V maximum), 5 mA/channel
External output signal Digital output 2 channels, photo coupler insulation, FET output, DC 24V, 50mA maximum per channel
Contact output 1 channel (1 common contact), dry contact. Contact capacity: DC30V, 0.5A (resistance load) 
Mass (kg) 37 39 46 56 72 112
Operating conditions Useable oil  Special mineral-oil base hydraulic oil/wear-resistant hydraulic oil. Viscosity grade: ISO VG32 to 68. Viscosity range: 15 to 400 mm2/s. Contamination: Within NAS class 10. Volumetric water content: 0.1% maximum 
Operating hydraulic oil temp (in tank) 0 - 60°C (Recommended operating temperature range: 15 ~ 50°C)  
Operating ambient temp 0 ~ 40°C
Storage ambient temp -20 ~ 60°C
Operating ambient humbidity  85% RH max. (No condensation) 
Installation site Indoors (Be sure to secure the unit with bolts) 
Other details 1: Be sure to connect a circuit breaker for all 3 poles and the earth leakage breaker.
2: Make sure that the electrical wiring meets the requirement of European Standard EN60204-1
3: Frequently turning the power supply off to the Super unit will shorten the service life - avoid where possible
4: Be sure to connect the ground terminal
Tank capacity (litres) N/A N/A N/A N/A N/A N/A
Standard coating colour

Ivory white (Munsell code: 5Y7. 5/1)


Super unit - Part Number:  SUT00S1510-30 SUT00S3010-30 SUT00S1516-30 SUT00S3016-30 SUT0000D4016-30 SUT00D6021-30
Pump unit Max flow rate (theoretical value l/min) 15.2 25.6 15.2 25.6 41.0 61.1
Max operating pressure (Bar) 100 100 160 160 157 206
Operating flow rate adjustment range l/min 2.5 ~ 15.2 3.4 ~ 25.6 2.4 ~ 15.2 3.4 ~ 25.6 5.4 ~ 41.0 8.7 ~ 61.1
Operating pressure adjustment range (Bar) 25 ~ 150 15 ~ 100 15 ~ 160 1.5 ~ 160 15 ~ 157 15~ 206
Motor capacity Motor capacity (equivelant KW) Equivelant to 2.8 KW Equivelant to 3.7 KW Equivelant to  3.7 KW Equivelant to 5.0 KW Equivelant to 3.7 KW Equivelant to  5.0 KW
Power supply Motor/pump unit 3-phase, 200V (50Hz), 200V (60Hz), 220V (60Hz) (Permissable voltage function +/- 10%) 
Rated current (A) AC3 200V (50Hz) 8.0 18.4 16.1 21.4 17.9 22.1
AC3 200V (60Hz) 7.8 18.4 15.8 21.4 17.7 21.7
AC3 220V (60Hz) 7.5 16.9 14.8 20.2 16.5 20.2
Power source breaker setting (A) 15 20 20 30 20 30
External Input signal 5 channels
Photo-coupler insulation, DC 24V (DC 27V maximum), 5 mA/channel
External output signal Digital output 2 channels, photo coupler insulation, FET output, DC 24V, 50mA maximum per channel
Contact output 1 channel (1 common contact), dry contact. Contact capacity: DC30V, 0.5A (resistance load) 
Mass (kg) 39 46 46 52 53 58
Operating conditions Useable oil  Special mineral-oil base hydraulic oil/wear-resistant hydraulic oil. Viscosity grade: ISO VG32 to 68. Viscosity range: 15 to 400 mm2/s. Contamination: Within NAS class 10. Volumetric water content: 0.1% maximum 
Operating hydraulic oil temp (in tank) 0 - 60°C (Recommended operating temperature range: 15 ~ 50°C)  
Operating ambient temp 0 ~ 40°C
Storage ambient temp -20 ~ 60°C
Operating ambient humbidity  85% RH max. (No condensation) 
Installation site Indoors (Be sure to secure the unit with bolts) 
Other details 1: Be sure to connect a circuit breaker for all 3 poles and the earth leakage breaker.
2: Make sure that the electrical wiring meets the requirement of European Standard EN60204-1
3: Frequently turning the power supply off to the Super unit will shorten the service life - avoid where possible
4: Be sure to connect the ground terminal
Tank capacity (litres) N/A N/A N/A N/A N/A N/A
Standard coating colour Ivory white (Munsell code: 5Y7. 5/1)

Unit type (Complete with oil tank) 

Super unit - Part Number:  SUT03S1507-30 SUT03S3007-30 SUT03S4007-30 SUT06S6007-30 SUT10S8007-30 SUT03S1510-30
Pump unit Max flow rate (theoretical value l/min) 15.2 28.5 39.7 61.1 83.0 15.2
Max operating pressure (Bar) 70 70 70 70 70 100
Operating flow rate adjustment range l/min 2.5 ~ 15.2 3.5 ~ 28.5 5.3 ~ 39.7 8.7 ~ 61.1 11.6 ~ 83.0 2.5 ~ 15.2
Operating pressure adjustment range (Bar) 15 ~ 70 15 ~ 70 15 ~ 170 1.5 ~ 70 15 ~ 70 15~ 100
Motor capacity Motor capacity (equivelant KW) Equivelant to 2.2 KW Equivelant to 2.8 KW Equivelant to  3.7 KW Equivelant to 5.0 KW Equivelant to 7.0 KW Equivelant to  2.8 KW
Power supply Motor/pump unit 3-phase, 200V (50Hz), 200V (60Hz), 220V (60Hz) (Permissable voltage function +/- 10%) 
Rated current (A) AC3 200V (50Hz) 11.5 15.4 16.1 22.1 25.5 8.0
AC3 200V (60Hz) 11.3 15.1 15.8 21.7 24.8 7.8
AC3 220V (60Hz) 10.6 13.8 14.8 20.2 22.7 7.5
Power source breaker setting (A) 15 20 20 30 50 15
External Input signal 5 channels
Photo-coupler insulation, DC 24V (DC 27V maximum), 5 mA/channel
External output signal Digital output 2 channels, photo coupler insulation, FET output, DC 24V, 50mA maximum per channel
Contact output 1 channel (1 common contact), dry contact. Contact capacity: DC30V, 0.5A (resistance load) 
Mass (kg) 59 59 64 97 131 59
Operating conditions Useable oil  Special mineral-oil base hydraulic oil/wear-resistant hydraulic oil. Viscosity grade: ISO VG32 to 68. Viscosity range: 15 to 400 mm2/s. Contamination: Within NAS class 10. Volumetric water content: 0.1% maximum 
Operating hydraulic oil temp (in tank) 0 - 60°C (Recommended operating temperature range: 15 ~ 50°C)  
Operating ambient temp 0 ~ 40°C
Storage ambient temp -20 ~ 60°C
Operating ambient humbidity  85% RH max. (No condensation) 
Installation site Indoors (Be sure to secure the unit with bolts) 
Other details 1: Be sure to connect a circuit breaker for all 3 poles and the earth leakage breaker.
2: Make sure that the electrical wiring meets the requirement of European Standard EN60204-1
3: Frequently turning the power supply off to the Super unit will shorten the service life - avoid where possible
4: Be sure to connect the ground terminal
Tank capacity (litres) 30 30 30 60 100 30
Standard coating colour Ivory white (Munsell code: 5Y7. 5/1)

Super unit - Part Number:  SUT03S3010-30 SUT03S1516-30 SUT06S3016-30 SUT06D4016-30 SUT06D6021-30 SUT10D6021-30
Pump unit Max flow rate (theoretical value l/min) 25.6 15.2 25.6 41.0 61.1 61.1
Max operating pressure (Bar) 100 160 160 157 206 206
Operating flow rate adjustment range l/min 3.4 ~ 25.6 2.4 ~ 15.2 3.4 ~ 25.6 5.4 ~ 41.0 8.7 ~ 61.1 8.7 ~ 61.1
Operating pressure adjustment range (Bar) 15 ~ 100 15 ~ 160 15 ~ 160 1.5 ~ 157 15 ~ 206 15~ 206
Motor capacity Motor capacity (equivelant KW) Equivelant to 3.7 KW Equivelant to 3.7 KW Equivelant to  5.0 KW Equivelant to 3.7 KW Equivelant to 5.0 KW Equivelant to  5.0 KW
Power supply Motor/pump unit 3-phase, 200V (50Hz), 200V (60Hz), 220V (60Hz) (Permissable voltage function +/- 10%) 
Rated current (A) AC3 200V (50Hz) 18.4 15.2 21.4 17.9 22.1 22.1
AC3 200V (60Hz) 18.4 15.2 21.4 17.7 21.7 21.7
AC3 220V (60Hz) 16.9 14.6 20.2 16.5 20.2 20.2
Power source breaker setting (A) 20 20 30 20 30 30
External Input signal 5 channels
Photo-coupler insulation, DC 24V (DC 27V maximum), 5 mA/channel
External output signal Digital output 2 channels, photo coupler insulation, FET output, DC 24V, 50mA maximum per channel
Contact output 1 channel (1 common contact), dry contact. Contact capacity: DC30V, 0.5A (resistance load) 
Mass (kg) 64 64 83 94 99 112
Operating conditions Useable oil  Special mineral-oil base hydraulic oil/wear-resistant hydraulic oil. Viscosity grade: ISO VG32 to 68. Viscosity range: 15 to 400 mm2/s. Contamination: Within NAS class 10. Volumetric water content: 0.1% maximum 
Operating hydraulic oil temp (in tank) 0 - 60°C (Recommended operating temperature range: 15 ~ 50°C)  
Operating ambient temp 0 ~ 40°C
Storage ambient temp -20 ~ 60°C
Operating ambient humbidity  85% RH max. (No condensation) 
Installation site Indoors (Be sure to secure the unit with bolts) 
Other details 1: Be sure to connect a circuit breaker for all 3 poles and the earth leakage breaker.
2: Make sure that the electrical wiring meets the requirement of European Standard EN60204-1
3: Frequently turning the power supply off to the Super unit will shorten the service life - avoid where possible
4: Be sure to connect the ground terminal
Tank capacity (litres) 30 30 60 60 60 100
Standard coating colour Ivory white (Munsell code: 5Y7. 5/1)

Super unit - Part Number:  SUT10D8021-30 SUT16D8021-30 P-SUT20D11KW-30 SUT00D8021-30 SUT00D11021-30
Pump unit Max flow rate (theoretical value l/min) 83.0 183.0 110 83.0 110
Max operating pressure (Bar) 206 206 206 206 206
Operating flow rate adjustment range l/min 11.6 ~ 83.0 11.6 ~ 83.0 13.3 ~ 110 11.6 ~ 83.0 13.3 ~ 110
Operating pressure adjustment range (Bar) 15 ~ 206 15 ~ 206 15 ~ 206 1.5 ~ 206 15 ~ 206
Motor capacity Motor capacity (equivelant KW) Equivelant to 7.0 KW Equivelant to 7.0 KW Equivelant to  11.0 KW Equivelant to 7.0 KW Equivelant to 11.0 KW
Power supply Motor/pump unit 3-phase, 200V (50Hz), 200V (60Hz), 220V (60Hz) (Permissable voltage function +/- 10%) 
Rated current (A) AC3 200V (50Hz) 25.5 25.5 38.3 25.5 38.3
AC3 200V (60Hz) 24.8 24.8 37.8 24.8 37.8
AC3 220V (60Hz) 22.7 22.7 34.9 22.7 34.9
Power source breaker setting (A) 50 50 75 50 75
External Input signal 5 channels
Photo-coupler insulation, DC 24V (DC 27V maximum), 5 mA/channel
External output signal Digital output 2 channels, photo coupler insulation, FET output, DC 24V, 50mA maximum per channel
Contact output 1 channel (1 common contact), dry contact. Contact capacity: DC30V, 0.5A (resistance load) 
Mass (kg) 133 145 360 72 112
Operating conditions Useable oil  Special mineral-oil base hydraulic oil/wear-resistant hydraulic oil. Viscosity grade: ISO VG32 to 68. Viscosity range: 15 to 400 mm2/s. Contamination: Within NAS class 10. Volumetric water content: 0.1% maximum 
Operating hydraulic oil temp (in tank) 0 - 60°C (Recommended operating temperature range: 15 ~ 50°C)  
Operating ambient temp 0 ~ 40°C
Storage ambient temp -20 ~ 60°C
Operating ambient humbidity  85% RH max. (No condensation) 
Installation site Indoors (Be sure to secure the unit with bolts) 
Other details 1: Be sure to connect a circuit breaker for all 3 poles and the earth leakage breaker.
2: Make sure that the electrical wiring meets the requirement of European Standard EN60204-1
3: Frequently turning the power supply off to the Super unit will shorten the service life - avoid where possible
4: Be sure to connect the ground terminal
Tank capacity (litres) 100 160 200 Tankless model Tankless model
Standard coating colour Ivory white (Munsell code: 5Y7. 5/1)

There are currently no reviews for this product

Awaiting video

Related Products

Related Categories

Vat Reg Number: 846644204 Company Registration Number: 5230249

Our site uses cookies to give you the best experience. Find out how to manage your cookies or click accept and continue using our site.